Task 30 - Repair Copper Pipe Work

Task 030

Repair Copper Pipe Work

 

1. Common defects with copper pipe work is a broken soldier joint or cracked pipe.

2. Common materials used to repair broken copper piping is a Welding torch, New piping, flux and solder.

3. Defects in materials can be a cracked pipe, or a leak on the solder joint.

4. Tools to repair common problems are a Soldering torch, flux and solder, pipe cutter and a flat head screwdriver and an Adjustable spanner.

5. Dangers of changing copper piping are risk of cutting your hand on the metal, or flooding if the water supply hasn’t been cut of properly.

6. METHOD STATEMENT:

Firstly I cut the water supply of from the stop cock, which is normally located in the kitchen. Secondly i locate the problem with the piping, then remove the defective part and replace with a new part. One Done check for any leaks or imperfections, once the water has been turned back on. Once happy the job has been completed to yours and the customer’s satisfaction, clean up any excess mess.

7. Cost of repair can vary between £60 - £100+

8. Once the job has been completed make sure any mess has been cleaned up and is safe for the customer to use and be around.